Skip to main content
Figure 5 | Aquatic Biosystems

Figure 5

From: High throughput screening of CO2-tolerating microalgae using GasPak bags

Figure 5

System used for charging specific concentration of CO 2 to the GasPak bags. For instance, to generate 10% (v/v) CO2, the flow of pure CO2 was set at the speed of 1 L/min using the controller on the right hand side and the flow of air was set at a velocity of 9 L/min using the controller on the left hand site. The CO2/air mixture was then used to inflate the GasPark bag as shown.

Back to article page